Therma Spring Solar Ring

Show Picture 1Show Picture 2Show Picture 9

Therma Spring Solar Ring

ThermaSpring Solar Mat 

Item # 17400
1 Review
Where to Buy

View retailers that sell SwimWays products.

Harness the sun's natural energy with the SwimWays ThermaSpring Solar Mat. The ThermaSpring Solar Mat maintains and raises pool temperature by reducing evaporation, keeping heating costs down. The twist-and-fold spring technology of each solar mat is easy to use, and the decorative oval shape is perfect for all pool shapes and sizes. For maximum effectiveness use multiple solar mats. The recommended coverage is 70-80% of your pools surface. (See details tab for recommended coverage.)

  • Helps to raise and maintain pool temperature without draining your power bill.
  • Reduces water and pool chemical evaporation.
  • Springs closed easily for storage and portability.
  • Decorative oval shape is perfect for all pool shapes and sizes!
  • Recommended coverage is 70-80% of pool surface. (See details tab for recommended coverage.)
  • Inflated dimensions of each mat are 37.5 x 65.5 inches (95.3 x 166.4 cm).

Made in China

Recommended Pool Coverage

Approximate Pool Dimensions * Recommended # of ThermaSpring Solar Mat with 70% coverage *
12 x 24 ft / 3.7 x 7.3 m 12
15 x 30 ft / 4.6 x 9.1 m 19
20 x 40 ft / 6.1 x 12.2 m 33
18 x 18 ft / 5.5 x 5.5 m 10
22 x 22 ft / 6.7 x 6.7 m 15

Product Instructions

To inflate:

  1. Remove valve cap and pull out stem to open.
  2. Inflate air chamber fully – but do not over-inflate.
  3. Immediately cover valve opening and press down firmly.
  4. Replace valve cap.

To deflate and store:

  1. Rinse with fresh water to remove salt or chlorine.
  2. Remove valve cap and pull out stem to release air. Deflate float before folding.
  3. Hold float as shown below, palms facing out. Bring your hands together in front of you.
  4. Overlap your hands and float will automatically close into 3 small circles.

How to Fold the Spring Float ThermaSpring Solar Ring
Note: When placing your mats in the pool, the "up" side is the decorated surface.

WARNING: This is not a flotation device. Do not attempt to sit on product.

Average Customer Review
Only Registered Customers can review
Register to leave a review

Showing comments 1-1 of 1

Posted by:doug
You make if VERY difficult to make a review!! I know why. This is an awful product. The valve does not pull out as indicated, it is SOLID one piece injected molded plastic. VERY VERY difficult to inflate. VERY VERY poor quality. Thin cheap plastic. I have seen NO CHANGE in temp and our pool is 80% Covered. One mat went flat the First week. One Star is too high for this product. You should deliver what you sell, not a CHEAP Chines piece of trash! ***We are very sorry to hear you had this experience with one of our products, and have forwarded your review to our customer service manager. Our customer service team can also be reached directly at 1-800-889-7946.***
Was this comment helpful? yes no
(5 people found this comment helpful, 1 did not)
Showing comments 1-1 of 1